Why Your Swim Spa Cover Stinks!

Hey, no offense, but your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at one time or another; water is one of nature’s most erosive substances. Moisture seeps in and ends up being trapped in between the external vinyl shell and the cling wrap foam cores. The warm, wet environment is best for mold and mildew and other forms of foul-smelling stuff.
If wetness has actually penetrated further into the cling wrap foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however also make the cover actually tough to remove, and not as reliable at keeping the heat in the spa. Time for a much better type of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or worn spots, torn joints. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off correctly, will ultimately start to puddle water, which is most likely time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also bad news, and although you can stave off the inevitable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A much better Swim Spa Cover can stand up to longer durations, but it’s an excellent routine to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to permit wetness to leave do so, however don’t remove fragile foam panels unless absolutely necessary.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, however it will not stop moisture very well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the intense wetness from your spa from reaching the foam core. The only real option is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained frequently with sanitizer and filtering, or is not stunned typically enough, bacteria and algae can make the most of a congenial environment to grow. Low pH, high chlorine or high ozone levels can also weaken the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near the spa, it absorbs the chemistry of the spa. Tidy, clear and hygienic water is the best environment to prevent smelly spa covers. (Sorry however this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roof, that can be even worse than no roofing at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times annually, so that it always looks excellent, and is secured from the components. Again, this really isn’t really going to stop the mold and mildew from growing inside a foam cover But it will assist your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step may appear obvious, however you need a good location to enable the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a warm place if possible, or a dry indoor place with low humidity can also be utilized.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as mild as possible. Don’t use home cleaning products on your Swim Spa Cover, strange chemicals can wind up in your spa water. Gently tidy all outside surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this ought to be avoided if possible, because the panels could end up being harmed throughout elimination or cleaning. However if you figure out that there is something slimy inside, you can usually unzip and remove the panel for a cleaning inside and out.

How frequently does your spa dealership expect you to do all this? If your swim spa is secured from most sun and rain, two times per year. If it’s visible it needs to be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The simplest cure for a stinky Swim Spa Cover is to just purchase a different type of Swim Spa Cover A stinky swim spa cover simply means that your cover is taking on wetness, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam but has actually sealed air chambers instead will prevent giving the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *