Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is among nature’s most erosive compounds. Moisture leaks in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, damp environment is perfect for mold and mildew and other kinds of smelly things.
If wetness has penetrated even more into the plastic wrapped foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, but also make the cover actually tough to remove, and not as effective at keeping the heat in the spa. Time for a better type of Swim Spa Cover

Stinky Swim Spa Cover?!?
• Broken or harmed. Cracked foam cores, ripped or worn areas, torn seams. A Swim Spa Cover that loses it’s arched roof line, to keep water draining off correctly, will eventually start to puddle water, which is probably time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also bad news, and although you can ward off the inescapable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can stand up to longer durations, however it’s an excellent routine to remove the cover and let it get some air on a weekly basis. If you can easily open the zipper to enable wetness to escape do so, however do not remove fragile foam panels unless absolutely necessary.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it won’t stop moisture effectively. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat welded seam are not going to keep the intense moisture from your spa from reaching the foam core. The only genuine solution is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained routinely with sanitizer and filtering, or is not shocked typically enough, bacteria and algae can take advantage of a hospitable environment to thrive. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near the spa, it takes in the chemistry of the spa. Clean, clear and sanitary water is the best environment to prevent stinky spa covers. (Sorry but this is simply BS) The fact is the spaces in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roofing, that can be even worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times each year, so that it constantly looks terrific, and is secured from the aspects. Once again, this truly isn’t really going to stop the mold and mildew from growing inside a foam cover However it will help your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step might seem obvious, but you need a good location to allow the cover to sit undisturbed from family pets, wild animals, and winds. It must be a bright area if possible, or a dry indoor area with low humidity can also be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Don’t use family cleaning products on your Swim Spa Cover, weird chemicals can end up in your spa water. Carefully tidy all exterior surface areas with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this need to be avoided if possible, because the panels might become damaged during removal or cleaning. However if you figure out that there is something slimy within, you can normally unzip and eliminate the panel for a cleaning inside and out.

How frequently does your spa dealer expect you to do all this? If your swim spa is secured from a lot of sun and rain, twice per year. If it’s exposed it should be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The easiest treatment for a foul-smelling Swim Spa Cover is to just buy a different type of Swim Spa Cover A stinky swim spa cover simply suggests that your cover is taking on moisture, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has sealed air chambers rather will avoid offering the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *